Gold Member Since 2013
Mingcheng Group Limited

Rtv-2 Silicone Rubber, Rtv-2 Silicone Rubber for Plaster, Rubber for Plaster Moulding manufacturer / supplier in China, offering Competitive Price RTV-2 Silicone Rubber for Plaster Moulding (RTV2030), Hot! Addition Silicone Rubber for Prototype Design and Production Tooling (MCPLA-H40), Liquid Silicone Rubber for Plaster Casting Cornice Mold/RTV Mold Making and so on.

(/ )

Supplier Homepage Product Gypsum, Plaster Decoration Products Molding Competitive Price RTV-2 Silicone Rubber for Plaster Moulding (RTV2030)

Competitive Price RTV-2 Silicone Rubber for Plaster Moulding (RTV2030)

FOB Price: US $5.8 / kg
Min. Order: 100 kg
Min. Order FOB Price
100 kg US $5.8/ kg
Get Latest Price
Production Capacity: 8000kg/Day
Transport Package: 20kg/Drum, 25kg/Drum or 200kg/Drum
Payment Terms: L/C, T/T, Western Union, Paypal

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: RTV2030
  • Material: Silicone Rubber
  • Form: Liquid Rubber
  • Color: White
  • Mixed Viscosity: 24000-25000 Cps ( Adjustable )
  • Curing Time: 4-6 Hours
  • Tear Strength: 30 N/Mm
  • Density(g/cm3,25 Centigrade): 1.10-1.15
  • Specification: REACH
  • HS Code: 39100000
  • Raw Material: Synthetic Rubber
  • Appearance: Liquid
  • Item: RTV 2030
  • Mixing Ratio: 100:2 / 100:3 / 100:4 / 100:5
  • Working Time: 30-40 Mins
  • Hardness: 28-30 Shore a
  • Tensile Strength: 3.8 Mpa
  • Trademark: MC SILICONE
  • Origin: China
Product Description

Brief Introduction of RTV-2 Silicone Rubber for Plaster Moulding

RTV-2 silicone rubber is a two component material, and it consist of Part A base silicone and Part B curing agent. When the two parts mix together and pour or brush on a object, the silicone base and curing agent can cure to be a silicone mold at room temperature; And 24 hours later, the silicone mold can be released from the object, and then the silicone mold can be poured into the following material to copy: Plaster, polyurethane, PU, GRC, cement, resin, polyester, wax etc...

Procedures of RTV-2 Silicone Rubber for Plaster Moulding

1. Make sure the surface of the original is clean and free of loose material.
2. Weight 100 Part A base and 2 parts of CA30 Curing Agent in a clean container.
3. Stir Part A base silicone before use thoroughly, as filler separation may occur upon prolonged storage.
4. Mix Part A and Part B evenly until the CA30 completely dispersed in the base.
5. Pour the mixed Part A base silicone and CA-30 curing agent as soon as possible onto the original
6. De-mold after 24 hours, it is will improve the replicate times of silicone mold.

Note: It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mix to completely expand and then collapse. After a further 1-2 mins under vacuum, the mix should be inspected and can be used if free of air bubbles. A volume increase of 3-5 times will occur on vacuum de-airing the mixture. So a suitably large container should be chosen.
Extensive Applications of RTV silicone rubber for concrete

RTV-2 silicone rubber can be used in the duplication of cement molds, concrete stones, artificial stones, plaster molding, figures, art objects, decoration molding, GRC products, gypsum products, resin products, PU molds. etc.

Competitive Price RTV-2 Silicone Rubber for Plaster Moulding (RTV2030)

 
 Technical parameter of RTV-2 Silicone Rubber for Plaster Moulding
Item RTV 2030
ColorLiquid white
Curing agentCA30
Mixing ratio100:2
Mixed viscosity24000 ~25000 cps
Working time30-40 Minutes
Curing time4-6 Hours
Hardness28-30 Shore A
Tear Strength30 N/mm
Tensile Strength0.3 MPA
Relative density1.10-1.15 g/cm3
Elongation at break480%

 
Send your message to this supplier
Avatar
Miss Berry Tan
*From:
To: Miss Berry Tan
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

Find Similar Products By Category