Gold Member Since 2013
Mingcheng Group Limited

Silicone Rubber, Silicone, Shoe Sole manufacturer / supplier in China, offering 30~40 Shore a Liquid Silicone Rubber for Shoe Sole Casting FDA, MSDS Certificated, Liquid Silicone Rubber for Silicon Moulds for Candles, RTV-2 Liquid Silicone for Casting Molds (RTV930) and so on.

(/ )

Supplier Homepage Product Shoe Mold Making Silicone RTV 30~40 Shore a Liquid Silicone Rubber for Shoe Sole Casting FDA, MSDS Certificated

30~40 Shore a Liquid Silicone Rubber for Shoe Sole Casting FDA, MSDS Certificated

FOB Price: US $4.8 / kg
Min. Order: 200 kg
Min. Order FOB Price
200 kg US $4.8/ kg
Get Latest Price
Production Capacity: 4000kg/Day
Transport Package: 20kg/Drum, 25kg/Drum or 200kg/Drum
Payment Terms: L/C, T/T, Western Union, Paypal

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: MCSIL-S Silicone Rubber
  • Material: Silicone Rubber
  • Form: Liquid Rubber
  • Color: off-White
  • Mixed Viscosity: 10000-11000 Cps
  • Curing Time: 4-6 Hours
  • Tear Strength: 18 N/Mm
  • Elongation at Break: 550%
  • Specification: REACH, MSDS
  • HS Code: 39100000
  • Raw Material: Silicone Rubber Raw Material
  • Appearance: Liquid
  • Item: Mcsil-S10
  • Mixing Ratio: 100:2
  • Working Time: 5-10 Mins
  • Hardness: 10-13 Shore a
  • Tensile Strength: 2.8 Mpa
  • Trademark: MC SILICONE
  • Origin: Dongguan, China
Product Description
30~40 Shore A Liquid Silicone Rubber for Shoe Sole Casting MSDS certificated

Description of Liquid Silicone Rubber for Shoe Sole Mold Making

Liquid Silicone Rubber for Shoe Sole Mold Making is a two-component material, the silicone consists of Part A silicone base and Part B CA30 curing agent, and the silicone base and curing agent can cure at room temperature by a condensation reaction. These materials can be cast into the cured silicone mold: Shoe mold making, sand casting etc.

Specifications of Liquid Silicone Rubber for Shoe Sole Mold Making

1. Good flow ability and long working time
2. Medium hardness
3. Easy de-mould from shoe mold
4. Low linear shrinkage

Applications of Liquid Silicone Rubber for Shoe Sole Mold Making

MCSIL-S silicone rubber is suited for shoe mold, simple products, sand casting mold making, and shoe mold by pouring way.

How to make the silicone mold?

1. Preparing
The surface of the original objects should be clean and free of loose material. If your products have thin flower patterns, and especially have porous substrates, please use a suitable mold release agent such as soap water, detergent, Vaseline or petroleum jelly.

2. Mixing
Please weigh Part A silicone base and part B CA30 Curing Agent with ratio of 100: 2 into a clean container. Stir Part A base silicone thoroughly before use, then Mix Part A and Part B evenly until the curing agent completely dispersed in the silicone base. Manual or mechanical mixture can be used, but do not last much time or allow the temperature to exceed 35C (95F). It's suitable to mix small quantities to ensure thorough mixture of silicone base and curing agent.
Note: It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mixture to completely expand and then collapse. After a further 1 to 2 minutes under vacuum, the mixture should be inspected and can be used if free of air bubbles. A volume increase of 3-5 times will occur on vacuum de-airing the mixture. So a suitably large container should be chosen.

3. Pouring the mixture and curing
Pour the mixed Part A base silicone and CA-30 curing agent as soon as possible onto the original object, avoiding air entrapment. The catalyzed material will cure to a flexible rubber within 6 hours (or faster by different mixing ratio or room temperature), we advice you de-mold after 24 hours, it is will improve the replicate times of silicone mold.

Storage of Liquid Silicone Rubber for Shoe Sole Mold Making

When the silicone rubber is stored at or below 30 C (85F) in the original unopened containers, silicone base and CA30 curing agent have a usable life of 12 months from the date of production.

Note of Liquid Silicone Rubber for Shoe Sole Mold Making

RTV silicone rubber is an industrial product and must not be used in food molding, dental human skin molding applications.

Packing of Liquid Silicone Rubber for Shoe Sole Mold Making

Part A base silicone: 20kg/drum, 25kg/drum or 200kg/drum
Part B CA30 Curing Agent: 0.25kg/bottle, 1kg/bottle and 10kg/bottle

Need more information, please feel free to contact us .

30~40 Shore a Liquid Silicone Rubber for Shoe Sole Casting FDA, MSDS Certificated
 
Item No.MCSIL-S10
Coloroff-white
Curing agentCA30
Mixing ratio100:2
Mixed viscosity10000-11000 cps
Pot life5-10 Minutes
Curing time 4-6  Hours
Hardness10-13 Shore A
Tear Strength18 N/mm
Tensile Strength2.8 MPA
Relative density 1.15 g/cm³
Shrinkage≤0.3%
Elongation at break550%

 
Send your message to this supplier
Avatar
Miss Berry Tan
*From:
To: Miss Berry Tan
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

Find Similar Products By Category