Print This Page

Home Chemicals Rubber & Rubber Products Rubber Materials

25 Shore a Translucent Platinum Cured Liquid Silicone Rubber Food Molds Making RTV2 Silicone Rubber pictures & photos

25 Shore a Translucent Platinum Cured Liquid Silicone Rubber Food Molds Making RTV2 Silicone Rubber pictures & photos

25 Shore a Translucent Platinum Cured Liquid Silicone Rubber Food Molds Making RTV2 Silicone Rubber pictures & photos

25 Shore a Translucent Platinum Cured Liquid Silicone Rubber Food Molds Making RTV2 Silicone Rubber

Raw Material:	Synthetic Rubber
Material:	Silicone Rubber
Appearance:	Liquid
Form:	Liquid Rubber
Item:	Mcpla-L25
Color:	Translucent

Samples:	US$ 0.1/kg 1 kg(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

Contact Supplier

Contact Now

Inquiry Basket

Mingcheng Group Limited

Gold Member Since 2013

Suppliers with verified business licenses

Manufacturer/Factory

Product Description

Company Info.

Basic Info.

Model NO.

MCPLA-L25

Mixing Ratio

1:1

Mixed Viscosity

7000~9000 Cps

Working Time

30~40 Mins

Curing Time

4~6 Hrs

Hardness

25 Shore a

Tensile Strength

3.8 MPa

Tear Strength

17 N/mm

Elongation at Break

600%

Shrinkage

0.1%

Shelf Life

12months

Transport Package

20kg/Drum; 200kg/Drum

Specification

REACH, MSDS, SGS

Trademark

MC SILICONE

Origin

Dongguan, China

HS Code

39100000

Production Capacity

4000kg/Day

Product Description

MC Silicone MCPLA Addition Cure Series is a two component material cures at room temperature to a Shore A 5~55 rubber by an addition reaction. A range of materials can be cast into the cured silicone mold:polyurethane and other reactive resins are the materials typically used. The polymerization can be accelerated by heat.

Features of platinum silicone rubber for food molds:
Convenient to operate because the RTV property
Easy to mix due to the low viscosity (7000~9000Cps)
High duplication because of high tear and tensile strength
Long shelf life with low shrinkage
Can be accelerated for rapid cure

Application of platinum silicone rubber for food molds:
1.A range of materials can be cast into the cured silicone mold:
polyurethane and other reactive resins
Small pieces of cement,plaster,concrete products.
Food like chocolate,fondants
Wax,candle,soap;
Low melt metal
2.casting body parts,shoe insole,cloth label,texture coating.

INSTRUCTION:Processing and Instructions of Addition Cure Silicone
1. Mixing the two components
According the mixing ration 1:1 weighting A and B, the two components may be thoroughly mixed either by hand or using a low-speed electric to minimize the degassing of bubbles and to avoid any temperature increase.
Note: It is also possible to use a special mixing and dispensing machine for the silicone components, further information is available upon request.
2. Moulding
The mixture should be degassed preferably at 30 to 50 mbar to eliminate any entrapped air. If a dispensing machine is used, the two components are degassed separately prior to mixing. The silicone mixture expands to 3-4 times of its initial volume and bubbles rise to the surface. The bubbles progressively disappear and the mixture returns to its initial volume after 5 to 10 minutes. Wait a few minutes to complete the degassing and then flash the vacuum. The silicone is ready for pouring, either by gravity or under low pressure.
Note: Flashing the vacuum once or twice accelerates the degassing. It is recommended to use a container with a high diameter/height ratio (3 to 4 times of the initial volume)
3. Polymerisation
The curing may be slowed down at lower temperature or accelerated by applying heat.
Note:
1.Contamination from sulfur (e.g., sulfur-based clay), amines, tin compounds, cured polyester resin, some paints and some silicone rubbers may inhibit surface cure of platinum-cured rubbers.
2.Apply a release agent, Although not usually necessary, a release agent will make demolding easier when casting into most surfaces.

Storage and shelf life of platinum silicone rubber for food molds:
When the silicone rubber is stored at or below 25 degree Celsius in the original unopened containers, Silicone Base and Curing agent have a usable life of 12 months from the date of production. After 12 months' stockpiles, please use tool to stir the Part A silicone for some minutes, then the silicone can be use again, no influence for other performance.
1.Store the original packing tightly sealed and at a temperature below 25 degree Celsius.
Use the product as soon as the packaging has been opened.
2.Close the lid tightly after taking out the proper amount of liquid silicone rubber.

Package:
20kg per drum, 200kg per drum
20kg/drum;480kg/pallet or 640kg/pallet.

25 Shore a Translucent Platinum Cured Liquid Silicone Rubber Food Molds Making RTV2 Silicone Rubber

25 Shore a Translucent Platinum Cured Liquid Silicone Rubber Food Molds Making RTV2 Silicone Rubber

R&D

25 Shore a Translucent Platinum Cured Liquid Silicone Rubber Food Molds Making RTV2 Silicone Rubber

Send your message to this supplier

*From:

*To:

*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for?  Post a Sourcing Request Now

Find Similar Products By Category

Supplier Homepage Products Addition Cure (Platinum Based) Silicones Cake Decorating Fondant Molds Making 25 Shore a Translucent Platinum Cured Liquid Silicone Rubber Food Molds Making RTV2 Silicone Rubber

Hot Searches

Liquid Silicone Rubber bulkbuy

You Might Also Like

Product Groups

More Product Catalogs

Contact Supplier

Contact Now

Inquiry Basket

Mingcheng Group Limited

Gold Member Since 2013

Suppliers with verified business licenses

Manufacturer/Factory

Terms of Payment

LC, T/T, D/P, PayPal, Western Union, Small-amount payment, Money Gram

OEM/ODM Availability

Yes