Mix Ratio 1: 1 Gray 160 Electronic Silicone Encapsulation PCB Electronics Potting Compound

Product Details
Customization: Available
Raw Material: Synthetic Rubber
Material: Silicone Rubber
Still deciding? Get samples of US$ 1/kg
Request Sample
Manufacturer/Factory
Gold Member Since 2013

Suppliers with verified business licenses

Terms of Payment
LC, T/T, D/P, PayPal, Western Union, Small-amount payment, Money Gram
OEM/ODM Availability
Yes
  • Mix Ratio 1: 1 Gray 160 Electronic Silicone Encapsulation PCB Electronics Potting Compound
  • Mix Ratio 1: 1 Gray 160 Electronic Silicone Encapsulation PCB Electronics Potting Compound
  • Mix Ratio 1: 1 Gray 160 Electronic Silicone Encapsulation PCB Electronics Potting Compound
  • Mix Ratio 1: 1 Gray 160 Electronic Silicone Encapsulation PCB Electronics Potting Compound
  • Mix Ratio 1: 1 Gray 160 Electronic Silicone Encapsulation PCB Electronics Potting Compound
Find Similar Products

Basic Info.

Model NO.
RTV-160
Appearance
Liquid
Form
Liquid Rubber
Item
Mcsil-E160
Color
Grey
Mixing Ratio
1:1
Mixed Viscosity
3000-6000 Cps
Working Time
30 -120 Mins
Curing Time
24 Hours
Hardness
55-60 Shore a
Dielectric Strength
20
Volume Resistivity
7*1014
Thermal Conductivity
0.58
Transport Package
20kg/Drum, 25kg/Drum or 200kg/Drum
Specification
REACH, MSDS, SGS
Trademark
MC SILICONE
Origin
Dongguan, China
HS Code
39100000
Production Capacity
4000kg/Day

Product Description

              
           Mix ratio 1:1 Gray 160 electronic silicone encapsulation PCB Electronics Potting Compound 


Description
Silicone compound is supplied as a two-component addition cure system. It consists of Part A and Part B. The component A is grey and component B is white for easy identification and inspection of complete mixing.(colors can be adjusted as per customer requirement.)
When the components are thoroughly mixed in a 1:1 ratio by weight or volume, the liquid mixture cures to a flexible elastomer, which is suited for electrical/electronic potting and encapsulating applications.

 
Item No. MCSIL-E160
Color gray
Mix Ratio 1:1
Viscosity mPa.s 25C < 4000
Density g/cm3 1.57±0.02
Pot life min 25C 30
Curing time  H 24
Curing time with heat min 100C 10
Hardness shore A 55-60
Dielectric strength kv/mm 25C ≥20
Volume resistivity DC500v Ω?cm 3×10 15
Tensile strength Mpa ≥0.6
Thermal conductivity w/m 0.63
Temperature C -30-200

Applications
Silicone is a general purpose compound suited for adhesive and coating. This cost-effective silicone can be used in a variety of electronic potting applications including the adhesive and coating for solar power, HID, LCD displayer, circuit board and electronic components, etc.
 
Mix Ratio 1: 1 Gray 160 Electronic Silicone Encapsulation PCB Electronics Potting Compound


USING INSTRUCTIONS
1. Preparing: Clean up the coating surface, remove the rust, dust, oil dirt.
2. Pouring: Weigh the silicone and catalyst correctly, mix silicone part A and part B thoroughly, pour onto the electronic components/surface after vacuum degassing.
3. Curing: Room temperature cure or heat-up cure is both workable.
4. It should be use up after open the package, the material must be kept in a cool place sealed well, and it should avoid from contact with moisture in the air.

Packing and Storage
1. Silicone rubber is shipped as kits that Part A and B liquid components in separate containers. It is available in packing in 5kg or 20kg,200kg per pail.
2. Silicone rubber must be tightly sealed in cool and dry place, prevented from sun and rain. Transport by non-dangerous goods.
It has a shelf life of 12 months.

Mix Ratio 1: 1 Gray 160 Electronic Silicone Encapsulation PCB Electronics Potting Compound

 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier