Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber

Mingcheng Group Limited
  • 14 yrs

Contact Supplier

Still deciding? Get samples of $ !
Request Sample

Product Highlights

  • High Transparency: Excellent clarity allows accurate observation of objects within the mold during the process.
  • Low Shrinkage Rate: Shrinkage is less than 0.1%, ensuring precise mold dimensions and part accuracy.
  • Strong Tear Resistance: Features outstanding tear strength of 16-18 N/mm for durable and long-lasting molds.
  • Easy Mold Release: Smooth surface finish facilitates effortless demolding of complex and detailed parts.
  • Versatile Applications: Ideal for jewelry, rapid prototyping, automotive parts, and label manufacturing.
  • Adjustable Working Time: Working time ranges from 60-90 minutes and can be adjusted based on requirements.
  • High Chemical Resistance: Resistant to artificial resins like PU, Epoxy, and PES for diverse molding needs.
  • Manufacturer Direct: Direct from manufacturer specializing in various silicone rubber series with competitive pricing.

Product Images of Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber

Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber
Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber pictures & photos
Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber
Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber pictures & photos
Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber
Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber pictures & photos
Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber
Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber pictures & photos
Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber
Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber pictures & photos
Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber
Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber pictures & photos
Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber
  • Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber
  • Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber
    Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber
  • Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber
    Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber
  • Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber
    Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber
  • Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber
    Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber
  • Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber
    Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber
  • Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber
    Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber

Find Similar Products

Product Description

Product Description

MCPLA-H40 RTV2 platinum cure silicone rubber is two component which cross-linking at room temperature into elastomer.The polymerization can be accelerated by heat (max.150 C). The silicone components are delivered as liquids, which once mixed and cured transform into  transparent, elastic and resistant material. 

Product Features of Addition Cure Silicone
#Excellent transparency to accurately see the object in the mold, ideal for cut molds or two- part silicone tools
#Exceptional mechanical properties including outstanding tear resistance 
#High chemical resistance to artificial resins (PU, Epoxy, PES)
#Accurate reproduction of details and easy mold release
#No shrinkage when cured means accurate mold and part dimensions


Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber
Applications of Addition Cure Silicone: 
Label manufacturing,Molding applications requiring low shrinkage.jewelry,automotive,rapid prototyping etc.
 
Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber
Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber
Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber
Product Parameters
 
Item No. MCPLA-H40A/B
Color Transparent clear
Viscosity ( cps,approx.) 45000~50000
Mix ratio (A:B) 10 : 1
Working time(at 25ºC ,minutes) 80~90(can be adjusted)
Curing time(at 25ºC,hrs,approx.) 24  (can be adjusted)
Hardness Shore A(after 24 h) 40
Tensile Strength(Mpa,after 24 h) 4.8~5.0
Elongation(%) 350
Tear Strength(N/mm) 16~17
Linear Shrinkage (%) ≤0. 1

 

Installation Instructions

Instructions for Prototyping Transparent Liquid Silicone Rubber

1. Mixing the two components
According the mixing ratio 10: 1 weighting part A and B, the two components may be thoroughly mixed either by hand or using a low speed electric to minimize the entrance of air and to avoid any temperature increase.
Note: It is also possible to use a special mixing and dispensing machine for the two silicone components, further information is available upon request.
2. Molding
The mixture should be degassed preferably at 30 to 50 mbar to eliminate any entrapped air. If a dispensing machine is used, the two components are degassed separately prior to mixing. The silicone mixture expands to 3 to 4 times of its initial volume and bubbles rise to the surface. The bubbles progressively disappear and the mixture returns to its initial volume after 5 to 10 minutes. Wait a few minutes to complete the degassing and then flash the vacuum. The silicone is ready for pouring, either by gravity or under low pressure.
Note: Flashing the vacuum once or twice accelerates the degassing. It is recommended to use a container with a high diameter/height ratio(3 to 4 times of the initial volume)
3. Polymerization
The curing may be slowed down at lower temperature or accelerated by applying heat.
Note: In general contact with certain materials can inhibit the cross linking of RTV.
Natural rubbers vulcanized with sulfur
RTV elastomeric is catalyzed with metal salts, e. G. Tin compounds
PVC stabilized with tin salts and additives
Epoxy catalyzed with amines
Certain organic solvents, such as Ketones, alcohols, ether etc.
In case of doubt, it is recommended to test the substrate by applying a small quantity of the mixed silicone on a restricted area.
Packaging & Shipping

Packaging & Shipping of Addition Cure Silicone 

Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber
Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber

20kg/drum: 400kgA+ 40kgB or 520kgA+52kgB per pallet

Storage & Shelf life of Additon Cure Silicone
MC Silicone  Addition Cure Silicone, Platinum Cure RTV Silicone should be used within 12 months from the manufacturing date.Beyond this date, MC silicone no longer guarantees the products confirms with the sales Specification.In order to preserve best properties it is recommended to follow strictly the following guild lines:
1.Store the original packing tightly sealed and at a temperature below 30 degree celcius.
2. Use the product as soon as the packaging has been opened.

  
Company Information
We are manufacturer, and specialized in manufacturing different hardness, different viscosity silicone rubber series, we are competitive in price with good quality. 
Rapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone RubberRapid Prototype, Jewelry Mold Making Platinum Cure Transparent RTV2 Liquid Silicone Rubber
Any futher questions,please feel free to contact nicole
MINGCHENG GROUP LIMITED 

About the Supplier

Mingcheng Group Limited
Mingcheng Group Limited
Mingcheng Group Limited
Mingcheng Group Limited
Mingcheng Group Limited
Mingcheng Group Limited
Mingcheng Group Limited
Mingcheng Group Limited

About Our Factory & Business Background

Address
No. 18, Zhouliao Road, Langzhou, Changping, Dongguan, Guangdong, China
Terms of Payment
LC, T/T, D/P, PayPal, Western Union, Small-amount payment, Money Gram
International Commercial Terms(Incoterms)
FOB, CFR, CIF, DDP, FCA, EXW
Average Lead Time
Peak Season Lead Time: within 15 workdays
Off Season Lead Time: within 15 workdays
Nearest Port
Shenzhen

Our Production Capability & Technical Expertise

Main Products
Silicone Rubber, Liquid Polyurethane Rubber, Epoxy Resin, RTV2 Silicone Rubber, Mold Making Silicone, Tin Cure Silicone, Electronic Potting Silicone, Addition Cure Silicone, Platinum Silicone, Urethane Mold Rubber

Our Industry Experience & Global Business Record

Export Year
2013-01-01
Main Markets
North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe

FAQ

What is the mixing ratio for components A and B?
The mixing ratio is 10:1 by weight. Components should be thoroughly mixed either by hand or using a low-speed electric mixer.
Can the working time be adjusted?
Yes, the working time is typically 60-90 minutes but can be adjusted according to specific project requirements.
Is this silicone suitable for jewelry making?
Yes, it is ideal for jewelry mold making due to its high transparency, low shrinkage, and ability to reproduce fine details.
How should the mixture be degassed?
The mixture should be degassed preferably at 30 to 50 mbar to eliminate entrapped air before pouring into the mold.
What materials inhibit the curing process?
Materials containing tin compounds, sulfur-vulcanized natural rubber, amines, or certain organic solvents may inhibit cross-linking.
What is the hardness of the cured silicone?
The hardness is 40 Shore A after 24 hours of curing at room temperature.

Send your message to this supplier

Contact Information
Recipient
Message

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now