Silicone Rubber for Molds for Concrete Balusters (RTV2030) similar HY 630
Brief Introduction of Silicone Rubber for Molds for Concrete Balusters (RTV2030) similar hongyejie 630
RTV-2 silicone rubber is a two component material, and it consist of Part A base silicone and Part B curing agent. When the two parts mix together and pour or brush on a object, the silicone base and curing agent can cure to be a silicone mold at room temperature; And 24 hours later, the silicone mold can be released from the object, and then the silicone mold can be poured into the following material to copy: Plaster, polyurethane, PU, GRC, cement, resin, polyester, wax etc...
Procedures of Silicone Rubber for Molds for Concrete Balusters (RTV2030) similar hongyejie 630
1. Make sure the surface of the original is clean and free of loose material.
2. Weight 100 Part A base and 2 parts of CA30 Curing Agent in a clean container.
3. Stir Part A base silicone before use thoroughly, as filler separation may occur upon prolonged storage.
4. Mix Part A and Part B evenly until the CA30 completely dispersed in the base.
5. Pour the mixed Part A base silicone and CA-30 curing agent as soon as possible onto the original
6. De-mold after 24 hours, it is will improve the replicate times of silicone mold.
Note: It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mix to completely expand and then collapse. After a further 1-2 mins under vacuum, the mix should be inspected and can be used if free of air bubbles. A volume increase of 3-5 times will occur on vacuum de-airing the mixture. So a suitably large container should be chosen.
Extensive Applications of RTV silicone rubber for concrete
Package of rtv2 liquid silicone rubber
We are manufacturer, and specialized in manufacturing different hardness, different viscosity silicone rubber and polyurethane rubber, we are competitive in price with good quality.
If you have any question, please contact Julie for further discussion. Thank you.
){kind=link}