Applications of RTV-2 Silicone liquid for molding
RTV-2 silicone is mainly applied for making various molds for reproduction concrete or cement, gypsum, gypsum, architecture, decorative arts and crafts, big statue, cultural relic products, etc.
Procedures of RTV-2 Silicone liquid for molding
1. Clean and prepare specimen (apply consolidant, sealant, or release agent if necessary).
2. Build retaining wall around specimen.
3. Stir silicone base to loosen any settled material.
4. Decant desired amount of silicone into mixing container.
5. Mix in appropriate amount of catalyst.
6. Apply to specimen.
7. If reinforced mold is desired, gently press in gauze after pouring fist layer.
8. When cured, gently remove mold from specimen.
9. If needed, create rigid backing or jacket over mold with plastic, Urethane foam, or plaster.
10. Remove backing material and mold. Store mold inside rigid backing.
Package
Part A base silicone: 5kg, 20kg/drum, 25kg/drum or 200kg/drum
Part B CA30 Curing Agent: 250g, 800g/bottle, 1kg/bottle
Storage
When the silicone rubber is stored at or below 30 centi degree in the original unopened containers, Silicone Base and Curing agent have a usable life of 12 months from the date of production. After 12 months stockpiles use the Stir to mix the Part A silicone for some minutes, then the silicone can be use again, no influence for other performance.
Professional factory of RTV-2 Silicone liquid for molding
We are manufacturer, and specialized in manufacturing different hardness, different viscosity silicone rubber series, we are competitive in price with good quality.
Need the technical datasheet for reference, please feel free to contact us.
){kind=link}