Silicone Liquid Rubber for Potting/Liquid Silicone Rubber

Product Details
Customization: Available
Raw Material: Synthetic Rubber
Material: Silicone Rubber
Still deciding? Get samples of US$ 0.1/kg
Request Sample
Manufacturer/Factory
Gold Member Since 2013

Suppliers with verified business licenses

Terms of Payment
LC, T/T, D/P, PayPal, Western Union, Small-amount payment, Money Gram
OEM/ODM Availability
Yes
  • Silicone Liquid Rubber for Potting/Liquid Silicone Rubber
  • Silicone Liquid Rubber for Potting/Liquid Silicone Rubber
  • Silicone Liquid Rubber for Potting/Liquid Silicone Rubber
  • Silicone Liquid Rubber for Potting/Liquid Silicone Rubber
  • Silicone Liquid Rubber for Potting/Liquid Silicone Rubber
  • Silicone Liquid Rubber for Potting/Liquid Silicone Rubber
Find Similar Products

Basic Info.

Model NO.
MC silicone
Appearance
Liquid
Form
Liquid Rubber
Item
RTV 160
Color
Grey
Mixing Ratio
1:1
Mixed Viscosity
3000-6000 Cps
Working Time
30 Mins
Curing Time
24 Hours
Hardness
55-60 Shore a
Dielectric Strength
20
Volume Resistivity
3×1015
Thermal Conductivity
0.58
Transport Package
20kg/Drum, 25kg/Drum or 200kg/Drum
Specification
REACH, MSDS, SGS
Trademark
MC SILICONE
Origin
Dongguan, China
HS Code
39100000
Production Capacity
8000kg/Day

Product Description

Description of Electronic Potting Silicone Rubber compounds for PCB

RTV160 is a two-component room temperature cure potting compound with mix ratio of 1: 1, curing time can be accelerated by heating up, features with good flow ability and flame resistance. It's suitable for encapsulating of LED displayers, power module and electronics components, etc.

Features of Electronic Potting Silicone Rubber compounds for PCB

Easy mix with 1: 1 proportion
Low viscosity, good flow ability
Room temperature cure or heat up cure
Thermal conduction, flame resistance
Without solvent

Using Instructions of Silicone Rubber For Electronic Encapsulating&Potting

1. Preparing: Clean up the coating surface, remove the rust, dust, oil dirt.

2. Pouring: Weigh the silicone and catalyst correctly, mix silicone part A and part B thoroughly, pour onto the electronic components/surface after vacuum degassing.

3. Curing: Room temperature cure or heat-up cure is both workable.

4. It should be use up after open the package, the material must be kept in a cool place sealed well, and it should avoid from contact with moisture in the air.


Note: Mechanical and electrical performance data tested at 25° C 7 days after curing, relative humidity of 55%; All the tested data is average value.

Packaging of Electronic Potting Silicone Rubber compounds for PCB

Packs are available in 20kg and 200kg per drum.

Storage & Transportation of Electronic Potting Silicone Rubber compounds for PCB

1. Keep it from strong sunshine, heat, and store in cool & dry place, well sealed. It has a shelf life of 12 months.
2. It can be stroked and transported as non-dangerous goods.
 
Item No. RTV 160
Color dark gray
Mix Ratio 1:1
Viscosity mPa.s 25C < 4000
Density g/cm3 1.57±0.02
Pot life min 25C 30
Curing time  H 24
Curing time with heat min 100C 10
Hardness shore A 55-60
Dielectric strength kv/mm 25C ≥20
Volume resistivity DC500v Ω?cm 3×10 15
Tensile strength Mpa ≥0.6
Thermal conductivity w/m 0.63
Temperature C -30-200


More information please contact Sophie:
Tel: 008613617490457

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier