| Customization: | Available |
|---|---|
| Raw Material: | Silicone Raw Material |
| Material: | Silicone Rubber |
Suppliers with verified business licenses
1. Good flow ability and long working time
2. Medium hardness
3. High tear and tensile strength
4. Easy de-mould from complex replica parts
5. Acid and alkali-resistance
6. Low linear shrinkage
Applications
It can be used for Candy, chocolate, cake and other resin crafts, gypsum and concrete products mold making etc.
Typical properties of Platinum Cure RTV2 Liquid Silicone for Chocolate/Candy/Cake Molds
Item No.: RTV1020L
Color Translucent
Specific Gravity(g/cm3,approx.) 1.1
Proportion(A:B) 1:1
Mixing viscosity(at 23°Capprox.) 9000
Max working time(at 23°C ,minutes) 45
De-molding time(at 23°C,hrs,approx.) 24
Hardness (after 24 h) 20 Shore A
Tensile Strength(Mpa,after 24 h) 3.6
Elongation (%) ≥550
Tear Strength (N/mm) 14
1-Take 100g of part A and add 100g of part B and mix the silicone rubber and curing agent evenly.
2-vacuum pumping
Without exception, this step takes less than 10 minutes. Otherwise, it will cause , and no more further steps will be available
3-Pouring mold or block mold of silicone rubber
The pouring way is an easy way to make molds, it's slowly and evenly pour into the mixed silicon rubber into the square frame. After the cross linking reaction.
){kind=link}